LUNAmoon. Opal Base #6, 13 ml

Opal Base  — is a camouflage base for coating and leveling nails.

Features:

• Low-acid 5-6 pH.
• Elastic and flexible.
• Provides a high level of coverage of the natural nail due to high pigmentation.
• May give minimal shrinkage during wear because it is elastic.
• Medium consistency.
• Ensures wear without lifting for 3-4 weeks.
• Has a neutral odor.
• Hypoallergenic.
• Removes well both by filing and with liquid.
• Does not run and self-levels very quickly.
• Requires a base layer of Rubber base LUNAmoon.
• Not suitable for leveling long nails without prior reinforcement.
• Curing time in lamp 120 seconds.
• Lamp power for curing — 36-48 W (this must be only the original lamp).
• The main rule during leveling: the thickness at the nail edge should be 0.5 mm.
• Thixotropic — becomes thinner if you move the brush while working.

Application method:

1. Removal.
2. Do not file the nail shape. Or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit nail file, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Manicure.
5. If you work with removers, after using them you need to wash your hands with soap and water.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Primer is used optionally, but if the base for the underlay has sufficient acidity, then primer is not needed.
8. Underlay with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to paint all the nail sidewalls. Cure for 60 seconds.
9. Wipe off the tacky layer.
10. Leveling with Opal Base LUNAmoon. Cure in lamp for 90 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the nail edge that will hold the free edge.
12. After filing, wipe off the tacky layer.
13. Apply top and cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

(Product photos on the website may differ from the actual product)