You Are Cute. Rubber base, clear, 5 ml, clear rubber base

RUBBER BASE — is a clear, universal base for coating.

Features:

• Has a pH acidity of 3–4.
• Minimal shrinkage during wear is possible due to the base's elasticity.
• May cause a sensation of heat and burning on damaged and very thin nails (not on healthy ones).
• Can be used as a base under all types of coatings and for extensions on gel nail tips.
• Medium consistency, self-leveling.
• Lamp power for curing the base — 36–48 W. The lamp must be original.
• Ensures wear without lifting for 3–4 weeks.
• Removes excellently both by filing and with liquid.
• Hypoallergenic and has a neutral odor.

Application method:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit nail file, file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is used optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Draw along all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. File the shape after leveling. This is necessary so that a thickness forms at the nail edge that will hold the free edge.
11. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
12. After filing, wipe off the tacky layer and apply a thin layer of gel polish or a camouflage base.
13. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine