You Are Cute. Bottle Gel #09, 15 ml, liquid gel with shimmer

LIQUID BUILDER GEL BOTTEL GEL — an innovative material for strengthening, leveling, and nail extension. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethylmethacrylate HEMA (approximately 20–30%), the main component of base coats. Such builder gel can completely replace the base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Acceptable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and addition of length.
• Good shock absorption.
• When strengthening with this builder gel, it is necessary to file the natural nail.
• Requires an underlay of Rubber Base.
• It can be additionally heated to make the builder gel more liquid.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit nail file, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe for every 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The underlay of Rubber Base is best applied with a flat brush for builder gel. Movements should be rubbing. Thoroughly coat all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with builder gel, make a distance of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material separation. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and coat with gel polish.
14. Apply top. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine