You Are Cute. Bottle Gel #12, 15 ml, liquid gel with shimmer

BOTTEL GEL Liquid Gel — innovative material for strengthening, leveling, and building up nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Polymerization wavelength: 365–405 nm.
• UV/LED lamp power: 36–48 W.
• Acceptable coating thickness: 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and building up.
• Has good shock absorption.
• When strengthening with this gel, the natural nail must be filed out.
• Requires a Rubber Base underlay.
• It can be additionally warmed up to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape, or leave a length of 2 mm to be removed after leveling.
3. Using a 220-grit nail file, file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a 100-grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and lateral folds.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. Apply the Rubber Base underlay best with a flat gel brush. Movements should be rubbing. Work into all the nail lateral folds and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with gel, leave a gap of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it can curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the gloss may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine