You Are Cute. Bottle Gel #14, 5 ml, liquid gel

BOTTEL GEL LIQUID GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• Can be additionally heated to make the gel more liquid.

Application Method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length to be removed after leveling.
3. Use a 220 grit nail file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If using removers, wash hands with soap after working with them.
6. Dehydrate the nail using Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the surface of the nail. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and nail folds.
7. Use primer if desired, but if the base for the underlay has sufficient acidity, it is not needed.
8. Apply the Rubber Base underlay best with a flat gel brush. Movements should be rubbing. Draw in all nail folds and cure in the lamp for 60 seconds.
9. Remove the tacky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material at the free edge.
13. After filing, remove the tacky layer and apply gel polish.
14. Apply top. Cure 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine