You Are Cute. Bottle Gel #17, 5 ml, liquid gel

LIQUID GEL BOTTEL GEL — innovative material for strengthening, leveling, and extending nails. It's a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace a base.

Features:

• Curing wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full curing takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape or leave it 2 mm longer, which we will remove after leveling.
3. Use a 220 grit nail file without strong pressure on the nail surface, lifting the nail plate scales, or use a 100 grit buffer.
4. Perform a manicure.
5. If using cuticle removers, wash hands with soap afterwards.
6. Dehydrate the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe over it, and clean everything in the cuticle area and sidewalls.
7. Primer is optional, but if the underlay base is acidic enough, it's not needed.
8. It's best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing motions. Work into all nail sidewalls and cure in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to build thickness at the nail edge that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the underside. This will prevent material lifting. If the material is hard and the nail is very soft, the natural nail may start separating from the hard material at the free edge.
13. After filing, remove the sticky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine