You Are Cute. Builder Gel #04, 15 ml, builder gel

Builder Gel – a polymer light-curing material that, due to its strength, allows significant extension of the nail plate. It contains photoinitiators that initiate the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

Features:

• Is acid-free.
• Has shock absorption, does not crack upon impact.
• Has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Suitable for the «no filing extension» technique.
• Suitable for extension «on top forms».
• Does not cause a burning sensation in the lamp.
• Becomes thicker in cold and thinner in warmth.
• Thixotropic — becomes thinner if you move the brush during work.
• It can be additionally warmed up to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Mandatory requires a Rubber Base underlay.
• Wavelength for polymerization: 365-405 nm.
• UV/LED lamp power: 36-48W.
• Allowable coating thickness: 0.5 mm at the tip / 1 mm at the apex.
• Full polymerization: 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm of length, which we will remove after leveling.
3. Using a 220-grit nail file, file without strong pressure on the top of the nail, lifting the nail plate scales, or use a 100-grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Paint all sidewalls of the nail and cure in a lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with builder gel, leave a 0.5–1 mm gap from the cuticle. Cure in a lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will support the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top. Cure for 120 seconds. After curing, do not wipe with anything as the shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and create a round shape.
3. Using a 220-grit nail file, file without strong pressure on the top of the nail, lifting the nail plate scales, or use a 100-grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use a primer
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Paint all sidewalls of the nail and cure in a lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Apply a nail form for extending the free edge.
11. Sculpt the artificial nail shape with clear builder gel. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe off the sticky layer and excess dust.
14. Go over the areas where you used the file again with Rubber Base. Cure for 30 seconds.
15. Level with builder gel, put into the lamp and pinch at the 10-15th second. If the gel has strong stickiness or contains glitter, pinch at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the sticky layer before applying gel polish.
18. Apply top. Cure for 120 seconds. After curing, do not wipe with anything as the shine may be lost.

(Product photos on the website may differ from the actual product)

TPO FREE