You Are Cute. Builder Gel #03, 15 ml, builder gel

Builder Gel is a polymer light-curing material that, due to its strength, allows substantial extension of the nail plate. It contains photoinitiators that trigger polymerization when exposed to ultraviolet light of a specific wavelength.

Features:

• It is acid-free.
• Has shock-absorbing properties; does not crack on impact.
• Medium consistency.
• Medium pigmentation; covers the free edge.
• Suitable for the “extension without filing” technique.
• Suitable for extension on “top forms”.
• Does not cause a burning sensation in the lamp.
• Thickens in the cold, thins in warmth.
• Thixotropic – becomes thinner when worked with brush movements.
• Can be additionally warmed to make the gel thinner.
• Hard at 1 mm thickness. If thinner than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and maintains the arch well.
• Requires a base layer of Rubber Base.
• Curing wavelength 365-405 nm.
• UV/LED lamp power 36-48W.
• Maximum coating thickness 0.5 mm at the tip / 1 mm at the apex.
• Full cure 120 seconds.

Application method: 

STRENGTHENING

1. Removal.
2. We do not file the nail shape or leave 2 mm of length to be removed after leveling.
3. File with a 220-grit nail file without strong pressure on the nail surface, lifting the scales of the nail plate, or use a 100-grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional; if the underlayer base has sufficient acidity, it is not needed.
8. Apply the Rubber Base underlayer best with a flat gel brush. Motions should be rubbing. Paint all nail recesses and cure in the lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. Level. If leveling with gel, keep a gap of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so we must file away 1 mm of the natural nail from the inside. This will prevent material lifting. If the material is hard and the nail is very soft, the nail will start separating from the hard material at the free edge.
13. After filing, wipe off the inhibition layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe, as shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Reduce the nail length to 1 mm and create a round shape.
3. File with a 220-grit nail file without strong pressure on the nail surface, lifting the scales of the nail plate, or use a 100-grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer
8. Apply the Rubber Base underlayer best with a flat gel brush. Motions should be rubbing. Paint all nail recesses and cure in the lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. Apply a nail form for extending the free edge.
11. Sculpt the artificial nail shape with clear gel. Cure for 30 seconds.
12. File the free edge and shape the nail as desired.
13. Wipe off the inhibition layer and excess dust.
14. Apply Rubber Base once more to the areas where the nail file was used. Cure for 30 seconds.
15. Level with gel, place in the lamp and pinch at the 10–15th second. If the gel has high tack or contains glitter, pinch at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the inhibition layer before applying gel polish.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe, as shine may be lost.

(Product photos on the website may differ from the actual product)

TPO FREE