HEYLOVE. Smart gel, MILKY, 15 ml, liquid builder gel, builder gel, milky white
Liquid builder gel in a bottle. Allows for quick nail extensions without filing, strengthening of natural nails, leveling and correcting nail plate imperfections.
During polymerization, the product does not heat up and does not cause discomfort.
Collection: BASIC
Video: https://www.instagram.com/reel/DEuMyzKIU2i/?igsh=MWpscGR1aDN6N3Z3bQ==
Consistency: liquid
Hardness/elasticity: medium elasticity
How to use:
- File the nail plate with a 180 grit nail file or a 100 grit buffer.
- Wipe with a degreaser to remove dust, especially under the cuticle and in the sidewalls.
- Apply dehydrator phBond and wait 30 seconds for it to evaporate moisture.
- Using rubbing motions, apply a primer layer of rubber base and add a small amount of base to create a smooth surface. Cure for 30 seconds.
- Remove the dispersion (sticky) layer from the base after polymerization, especially under the cuticle.
- Apply Smart gel in an architectural layer. Cure for 30 seconds each, then place both hands in the lamp again for 1 minute.
- Remove the sticky layer from Smart gel.
- Perform surface filing if desired and be sure to file the edge to create thickness with the gel.
- As the final layer, apply finish coat (top). Cure for 1-2 minutes.
- Using a carbide bit shaped like 'corn', file out the natural nail from underneath the free edge area.
- Gently buff the edge with a buffer to avoid damaging the coating surface.
- Wipe with a damp cloth to remove dust and apply cuticle and hand care products. Done!
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone. May Contain: Cl 45380, CI 15850, Cl 77491, CI 15985, CI 77492, CI 77007, Cl 77510, Cl 77742, Cl 77289, Cl 77499, Cl 77891, CI 77000.
Warning! To avoid unwanted polymerization of the material during work, testing, or content shooting, the open bottle or brush should be kept as far away from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of an operating UV lamp facing away from the technician. If the switched-on lamp is positioned with the light towards the technician, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
- Ukraine
- bottle gel
- No filing
- Sheer
- Liquid
- Холодный/без жжения
- Белые/молочные