LUNAmoon. Opal Base #3, 13 ml

Opal Base  — is a camouflaging base for covering and leveling nails.

Features:

• Slightly acidic pH 5-6.
• Elastic and flexible.
• Provides a high level of coverage for the natural nail due to high pigmentation.
• May show minimal shrinkage during wear because it is elastic.
• Medium consistency.
• Provides wear without lifting for 3-4 weeks.
• Has a neutral odor.
• Hypoallergenic.
• Removes well both by filing and with liquid.
• Does not run and self-levels very quickly.
• Requires a base of Rubber base LUNAmoon.
• Not suitable for leveling long nails without prior reinforcement.
• Curing time in the lamp: 120 seconds.
• Lamp power for curing — 36-48 W (must be only an original lamp).
• Main rule during leveling: the thickness at the nail edge should be 0.5 mm.
• Thixotropic — becomes thinner when you move the brush during work.

Application method:

1. Removal.
2. Do not file the nail shape. Or leave 2 mm in length, which will be removed after leveling.
3. Using a 220 grit file, lightly file without strong pressure, the nail top, raising the nail plate scales, or use a 100 grit buffer.
4. Manicure.
5. If you work with removers, after using them you need to wash your hands with soap and water.
6. Degrease the nail using Nail Prep. We do two approaches. For this we use 4 wipes (1 wipe per 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, place a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. Primer is used at will, but if the base for the underlay has sufficient acidity, then primer is not needed.
8. Underlay with Rubber base Lunamoon. It is best applied with a flat gel brush. Movements should be rubbing. It is important to paint all the sinuses of the nail. Cure for 60 seconds.
9. Wipe off the sticky layer.
10. Leveling with Opal Base LUNAmoon. Cure in the lamp for 90 seconds.
11. Filing the shape after leveling. This is needed so that a thickness forms on the edge of the nail that will hold the free edge.
12. After filing, wipe off the sticky layer.
13. Apply top coat and cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.

(Product photo on the website may differ from the actual product)