HEYLOVE. Tint base, MACADAMIA, 15 ml, tinted base
Descrição
Due to dense pigmentation and elasticity, the tint base MACADAMIA creates a perfectly even coverage already after the first coat.
Shade: brown
Collection: LIFESTYLE
Collection overview at the link: https://www.instagram.com/reel/DEziujPItnV/?igsh=YTJ4cWlxeDcxbHQ1
Consistency: medium
Hardness/Elasticity: elastic
Acidity: neutral, pH=6,7
Scent: neutral
Pigmentation: dense, covers the free edge
Application:
-
Thoroughly degrease the nail plate using a dehydrator phBond.
- Apply an acid-free primer to the nail tip Ultrabond and wait for the liquid to dry completely.
-
Apply a layer of clear base coat Rubber base as a base and polymerize for 30 seconds.
-
Apply one or two coats of Tint base. Polymerization time in UV/LED lamp is 60 seconds.
-
Lastly apply in a ball finish coat (top coat).
Volume: 15 ml
Manufacturer: "HEYLOVE"
Country: Ukraine
INCI: Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Warning! To avoid unwanted polymerization of the material during work, testing or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also note that even in cloudy weather, clouds transmit a large amount of UV radiation, sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the active UV lamp facing away from the technician. If you keep the active lamp facing the technician, unwanted polymerization may occur on brushes and necks of open bottles.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on density (viscosity).
It is simply a law of physics, nothing else.
For example, in water, bubbles last very briefly and escape on their own.
If we take denser liquids (honey, thick building gel, etc.) - in these products bubbles settle readily and do not leave as quickly as in water.
The same with base coat. If you work with the brush carelessly, sharply plunging it into the bottle, it inadvertently acts as a blender, mixing the material with air, forming bubbles. This applies especially to materials in bottles with a brush.
Therefore, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we worked on the development of the tint base product, we had a choice of density. We deliberately chose a medium density consistency, because there are advantages:
- the material does not run anywhere, does not flood;
- clean contours without extra effort;
- the master calmly applies the architecture and has time to check it by the reflection;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
At our production facility, we have equipment that prevents bubble formation in the material at all stages – from pigment mixing to pouring into bottles.
We also advise our partners that we are against a store consultant opening a bottle to show the material to a client. Because a consultant who is not a master doesn’t understand that the brush can create bubbles, even without realizing it.
Not to mention that the bottle necks look unaesthetic when they are smudged with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not remove the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the laws of physics, in a warm environment molecules move faster, and this speeds up the process.
Air will rise to the surface; it is lighter than liquid.