Carrinho vazio
PRO BASE-BOND - thin base bond for gel system
Used as a priming adhesive base coat for hard polymer materials: gels, acrygels, acrylics.
The main advantage of PRO BASE-BOND is that it does not require the use of ULTRABOND or ACID PRIMER.
Advantages:
+ provides ideal adhesion of materials to the natural nail plate
+ does not thicken the coating
+ speeds up work
- sufficiently acidic, not suitable for clients with hypersensitive or damaged natural nail plate
Hardness: medium.
Viscosity: medium.
Density: low.
Acidity: high.
Application technique:
0. Prepare the nail plate: perform a manicure, shape the free edge as needed
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish hue appears on the nail plate surface
3. Bonding: when using PRO BASE-BOND, skip this step
4. Base layer: apply the base in an even layer without leveling, paying attention to side zones and free edge. Polymerize in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
PRO tip:
· before applying gel products, DO NOT remove the tackiness from the base
· DO NOT use as a leveling layer