STALEKS. Fresa diamantata "CILINDRO ARROTONDATO", blu, Ø 2.5 mm

STALEKS PRO bit Cylinder rounded, blue, 2.5 mm — a medium abrasive attachment with diamond coating for delicate skin treatment. This shape processes side walls, calluses, cracks, removes gel and acrylic buildup, and sands nail plates before applying artificial material. With medium hardness abrasive, it is advisable to avoid treating natural nails.

The bit is made by spraying diamond grit onto a metal blank made of medical-grade stainless steel. Grains of medium fraction are applied: evenly, densely covering the entire working area, without gaps or clumping in one place. The grit is fixed through a galvanic process: a thin layer of nickel holds the diamond grains, making the bond strong and durable.

This coating technology gives the working area hardness, wear resistance, and eliminates surface irregularities. Thanks to the high quality of the grit, the attachment will last longer, and its center of rotation does not shift when working at high speeds of the drill.

The nail sanding bit delicately treats side walls, quickly sands nail plates, eliminating irregularities, and removes material buildup. It is important to treat the area smoothly, without pressure, avoiding sudden movements and prolonged exposure to one spot.

When performing a pedicure, bits for heel cracks with a blue notch gently and quickly treat cracks, dry calluses, corns, and remove skin thickening without the risk of injuring the client.

Maximum permissible rotation speed up to 30,000 rpm. It is important to adhere to the recommended number of revolutions for each type of attachment and procedure to avoid overheating and client injury.

Optimal speed for performing manicure procedures:

• Natural nails, skin, thousand rpm: 5-10 — filing, thickness reduction, sanding, polishing; 10-15 — cuticle removal, sanding side walls, cleaning pockets.
• Artificial nails, thousand rpm: 15-20 — thickness removal, shaping; 20-25 — coating removal, design; 25-30 — free edge shaping; more than 30 — specific types of design, other work.
• Pedicure, thousand rpm: 5-15 — corn removal, skin sanding; 15-25 — crack cleaning, surface callus removal; 25-30 and more — work with core calluses, other types of work.

The bit for sanding skin around the nail with a blue notch is safe when used correctly and resistant to corrosion. It will not be damaged during sterilization and disinfection (cold or hot), except when using disinfectant solutions based on active oxygen.

Features of the diamond bit cylinder rounded Staleks Pro EXPERT FA30B025/10:

• purpose: pedicure, electric manicure;
• shape: cylinder rounded;
• base material: stainless steel;
• high-quality diamond coating;
• notch: blue;
• abrasiveness: medium;
• working part size: length — 10 mm, diameter — 2.5 mm;
• recommended speed: up to 30 thousand rpm;
• service life: 3-4 months;
• corrosion resistance;
• in package: 1 pc.

Application of the diamond bit Staleks Pro EXPERT cylinder rounded 2.5 mm blue:

1. Choose the tip according to the area being treated: bit for gel removal, sanding, length filing, etc. It is also important to adhere to the recommended number of revolutions to avoid overheating and client injury.
2. Do not drop or hit the tool — this may cause the center of rotation to shift, leading to defects. Do not use a deformed tip.
3. Regularly check the centering of the bit for side wall treatment visually or using a special tool.
4. During work, use gloves, protective glasses or a shield.

Cleaning diamond attachments

• Immediately after use, remove the tip from the handpiece. Using a soft brush, carefully remove any remaining nail dust and other contaminants. Try not to scratch the surface to avoid damage.
• For light contamination, rinsing under running water with a brush is not recommended to prevent the spread of splashes with possible infectious agents.
• Disinfection: prepare a disinfectant solution, place the attachments, following the manufacturer's instructions for concentration and time. It is recommended to choose products that destroy hepatitis B, C, and dermatomycosis viruses.
• Washing: use a container with warm soapy water and a mild detergent. Soak the tools for 10-15 minutes to soften remaining contaminants. You can use an ultrasonic bath for deeper pre-sterilization cleaning.
• Sterilization. Place the tools in sterilization pouches intended for a dry heat sterilizer, or in containers for an autoclave, to protect them from damage and ensure proper air or steam circulation.
• Sterilization time in a dry heat sterilizer: at a temperature of 180°C for 60 minutes, 160°C — 150 minutes. Autoclave: at a temperature of 120°C, pressure 1.1 atm. — 45 minutes; 132°C, pressure 2 atm. — 20 minutes. After the process is complete, it is recommended to leave the tips for 1 hour to avoid sudden temperature changes.
• Regularly check the operation of the autoclave or dry heat sterilizer using biological indicators.
• Store in a dry, clean condition in a closed container. Choose a dry storage place to prevent rust and mold. Avoid moisture, dust, loose, and abrasive substances getting between the working surfaces.

When to replace the tool:

Proper use, storage, and cleaning will maintain functionality for up to 3-4 months.

When to replace attachments:

1. The metal has corroded, the coating has become uneven, with bald spots.
2. The working area has lost abrasiveness, become smooth in places, and clogged with material. Chips and burrs have formed on the tips of sharp shapes.
3. Material removal takes longer than usual, and you feel the need to press harder to get results.
4. The tool vibrates during coating removal, causing a burning sensation.
5. Warping. Tips can warp as a result of drops, prolonged use, or be destroyed by aggressive disinfectants and high temperatures during sterilization. They hit the client's nail hard, overheat due to vibration, which shortens the service life of the handpiece.

Brand: Staleks
Country: Ukraine