HEYLOVE. Nail cushion «Bordo», 2 g, gel paint for ombre, stamping and drawing, deep bordeaux
Descripción
1️⃣ Open the cap and remove the white protective valve
2️⃣ Use the mesh dispenser for the ideal amount of material on the sponge
(for a more saturated effect, work without the mesh)
3️⃣ Secure the sponge in the holder.
4️⃣ Create a gradient in 2 steps:
• Apply the base tone and cure.
• Add color to the tip of the nail for a smooth transition.
If too much material has been applied, it can be easily removed with a clean sponge.
6️⃣ Cure each layer in the lamp for 60 seconds
7️⃣ Apply a thin layer of baseover the finished design, cure, then apply a thin layer of top coat. Securing with a combination of base and top coat will prevent chipping.
Curing time of gel paint: 1-2 minutes
Volume: 6 pcs of 2 g
Manufacturer: TM "HEYLOVE"
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! To avoid unwanted polymerization of the material during work, testing or shooting for content, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to polymerize. When painting tips, we recommend keeping the working side of the operating UV lamp away from the master. If you keep the lamp turned on with the light towards the master, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
Características
Documentos
Opiniones
Todavía no hay reseñas para este producto
Ningún comentario encontrado