HEYLOVE. Nail cushion «Bordo», 2 g, gel paint for ombre, stamping and drawing, deep burgundy
Descrizione
1️⃣ Aprire il coperchio e rimuovere la valvola di protezione bianca
2️⃣ Utilizzare la retina dosatrice per la quantità ideale di prodotto sulla spugnetta
(per un effetto più intenso lavorare senza retina)
3️⃣ Fissare la spugnetta nel supporto.
4️⃣ Creare un gradiente in 2 fasi:
• Applicare la base e polimerizzare.
• Aggiungere il colore sulla punta dell'unghia per una transizione morbida.
Se si nota di aver applicato troppo prodotto, l'eccesso si rimuove facilmente con una spugnetta pulita.
6️⃣ Polimerizzare ogni strato in lampada per 60 secondi
7️⃣ Applicare uno strato sottile sopra il design finito di base, polimerizzare, poi applicare uno strato sottile di top coat. La combinazione di base e top coat previene le scheggiature.
Tempo di polimerizzazione della vernice gel: 1-2 minuti
Volume: 6 pezzi da 2 g
Produttore: TM "HEYLOVE"
Paese: Ucraina
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attenzione! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away as possible from daylight (especially direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to polymerize. When painting tips, we recommend keeping the working side of the active UV lamp turned away from the master. If you hold the switched-on lamp with the light facing the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.
Note: all documents are in the attached files!
Caratteristiche
Documenti
Recensioni
Non ci sono ancora recensioni per questo prodotto
Nessun messaggio trovato