HEYLOVE. Nail cushion «Pink», 2 g, gel paint for ombre, stamping and drawing, pink
Descripción
1️⃣ Open the lid and remove the white protective valve
2️⃣ Use the mesh dispenser for the perfect amount of material on the sponge
(for a more intense effect, work without the mesh)
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base tone and cure.
• Add color to the nail tip for a smooth transition.
If you applied too much material, excess can be easily removed with a clean sponge.
6️⃣ Cure each layer in the lamp for 60 seconds
7️⃣ Apply a thin layer over the finished design of base, cure, then apply a thin layer of top coat. Sealing with a combination of base and top coat prevents chipping.
Curing time for gel paint: 1-2 minutes
Volume: 6 pcs of 2 g
Manufacturer: TM "HEYLOVE"
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! Para evitar una polimerización no deseada del material durante el trabajo, pruebas o filmación de contenido, el frasco abierto o el pincel deben mantenerse lo más lejos posible de la luz del día (especialmente de los rayos solares directos). También solicitamos tener en cuenta que incluso en clima nublado, las nubes dejan pasar una gran cantidad de radiación ultravioleta, suficiente para que el material se polimerice. Al pintar tips, recomendamos mantener el lado de trabajo de la lámpara UV encendida alejado del maestro. Si se sostiene la lámpara encendida con la luz hacia el maestro, puede ocurrir una polimerización no deseada del material en los pinceles y en los cuellos de los frascos abiertos.
Nota: todos los documentos se encuentran en los archivos adjuntos!
Características
Documentos
Opiniones
Todavía no hay reseñas para este producto
Ningún comentario encontrado