HEYLOVE. Nail cushion «Pink», 2 g, Gel Paint für Ombré, Stamping und Nail Art, pink
Beschreibung
1️⃣ Open the lid and remove the white protective tab
2️⃣ Use the mesh dispenser for the perfect amount of material on the sponge
(for a more intense effect, work without the mesh)
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base tone and polymerize.
• Add color to the nail tip for a smooth transition.
If you have applied too much material, the excess can be easily removed with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds
7️⃣ Apply a thin layer over the finished design base, polymerize, then apply a thin layer of top coat. Fixing with a combination of base and top coat prevents chipping.
Polymerization time of Gel Polish: 1-2 minutes
Volume: 6 pcs of 2 g each
Manufacturer: TM "HEYLOVE"
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! Um eine unerwünschte Polymerisation des Materials während der Arbeit, des Testens oder des Drehs für Content zu vermeiden, muss die geöffnete Flasche oder der Pinsel so weit wie möglich von Tageslicht (insbesondere von direkten Sonnenstrahlen) ferngehalten werden. Wir bitten auch zu beachten, dass selbst bei bewölktem Wetter die Wolken eine große Menge an UV-Strahlung durchlassen, die ausreicht, um das Material zu polymerisieren. Beim Färben von Tips empfehlen wir, die Arbeitsseite der eingeschalteten UV-Lampe vom Nageldesigner wegzuhalten. Wenn die eingeschaltete Lampe mit dem Licht zum Nageldesigner gehalten wird, kann eine unerwünschte Polymerisation des Materials auf den Pinseln und den Hälsen der geöffneten Flaschen auftreten.
Hinweis: Alle Unterlagen befinden sich in den angehängten Dateien!
Eigenschaften
Dokumente
Bewertungen
Für dieses Produkt liegen noch keine Bewertungen vor
Keine Beiträge gefunden.