HEYLOVE. Nail cushion «Beige», 2 g, gel paint for ombre, stamping and nail art, beige
Descrizione
1️⃣ Aprire il coperchio e rimuovere la valvola protettiva bianca
2️⃣ Utilizzare la reticella dosatrice per una quantità ideale di materiale sulla spugna
(per un effetto più intenso, lavorare senza reticella)
3️⃣ Fissare la spugna nel supporto.
4️⃣ Creare la sfumatura in 2 fasi:
• Applicare la base e polimerizzare.
• Aggiungere il colore sulla punta dell'unghia per una transizione morbida.
Se si è applicato troppo materiale, l'eccesso può essere rimosso facilmente con una spugna pulita.
6️⃣ Polimerizzare ogni strato nella lampada per 60 secondi
7️⃣ Applicare sopra il design finito uno strato sottile di base, polimerizzare, poi applicare uno strato sottile di top. Il fissaggio con una combinazione di base e top previene scheggiature.
Tempo di polimerizzazione della vernice gel: 1-2 minuti
Volume: 6 pezzi da 2 g
Produttore: TM "HEYLOVE"
Paese: Ucraina
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attenzione! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Please also note that even on cloudy days, clouds transmit a large amount of UV radiation sufficient to polymerize the material. When painting tips, we recommend keeping the working side of the active UV lamp away from the master. If you hold the lamp on with the light towards the master, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
Caratteristiche
Documenti
Recensioni
Non ci sono ancora recensioni per questo prodotto
Nessun messaggio trovato