HEYLOVE. Nail cushion «Black», 2 g, gel paint for ombre, stamping and painting, rich black
Beschrijving
1️⃣ Open the cap and remove the white protective valve
2️⃣ Use the mesh dispenser for an ideal amount of material on the sponge
(for a richer effect work without the mesh)
3️⃣ Secure the sponge in the holder.
4️⃣ Create a gradient in 2 stages:
• Apply the base tone and polymerize.
• Add color to the nail tip for a smooth transition.
If you applied too much material, the excess can be easily removed with a clean sponge.
6️⃣ Polymerize each layer in a lamp for 60 seconds
7️⃣ Apply a thin layer over the finished design base, polymerize, then apply a thin layer of top coat. Securing with a base and top combination will prevent chipping.
Polymerization time of gel paint: 1-2 minutes
Volume: 6 pcs of 2 g
Manufacturer: TM "HEYLOVE"
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! To avoid unwanted polymerisation of the material during work, testing or content creation, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also note that even in cloudy weather, clouds transmit a large amount of UV radiation sufficient to polymerise the material. When painting tips, we recommend keeping the working side of the active UV lamp turned away from the master. If you keep the lamp on with the light facing the master, unwanted polymerisation of the material on brushes and necks of open bottles may occur.
Note: all documents are in the attached files!
Kenmerken
Documenten
Beoordelingen
Er zijn nog geen beoordelingen voor dit product
Geen berichten gevonden